Nowadays, the application rate of CNC flame cutting machine is becoming more and more common. In the operation process, a suitable operation method will be selected to achieve a good use effect. Let's learn about the air pressure problems of the CNC flame cutting machine.
The technology of the CNC flame cutting machine is becoming more and more mature. To use the fully automatic cutting machine, you need to master the flame of the cutting torch. The key to the adjustment of the flame is the gas source. In general, most of the oxygen in the processing process is the pipeline oxygen. Purity and pressure can generally meet the requirements of use, but most of the gas is bottled gas. A bottle of 30 kg of gas. In the scale of 5 machines and 5 streams, the use time is about 2 hours. In this way, the gas source must be replaced midway. As a result, the gas pressure fluctuates greatly, which directly affects the gas flow rate and causes problems in cutting.
In addition, the gas source pressure fluctuates greatly at the beginning and end of each bottle of gas. It is a good way to use warm water heating on site to ensure the stability of the gas source. In addition, ensure that the current equipment is in good condition. Based on the operating regulations, regularly check for leaks in pipelines, joints, etc., lubricate bearings, pin holes, etc., clean cutting nozzles, cooling water pipes, etc., and complete some routine work to ensure normal operation and improve effect.https://www.wxsilvercoast.com/