When welding the roller rack equipment, the equipment should be fixed according to the equipment requirements of general equipment. It can be fixed with expansion bolts or with a pressure plate. part integrity.
After welding the roller frame equipment, check whether each part of the equipment meets the assembly requirements, and ensure the normality of the electrical wiring of each part, check and organize the periphery of the equipment, and ensure that there are no obstacles that affect the normal operation of the equipment. Preliminary operation: When starting the operation, there should be no abnormal noise and vibration phenomenon. If it is necessary to eliminate the fault, hang the workpiece on the roller frame for a trial operation for a week, and observe whether the workpiece is close to the roller and whether there is a large axial direction. Move, otherwise it is necessary to adjust the placement position of the roller frame.
The power-on operation can only be performed after the equipment is in normal operation. When the equipment starts to work, there should be no abnormal noise and vibration. If there is, it is necessary to eliminate the fault first. After the workpiece is hung on the roller frame, is it appropriate to observe the orientation of the workpiece first? Is the workpiece snug against the rollers? Is there any foreign object on the workpiece that hinders tumbling? When everything is normal, it can be officially started.
Before starting the motor, carefully calibrate the wiring once. After confirming that the wiring is correct, turn on the power switch and start the motor. need speed. The remote control box drawn from the control box is used to operate the roller frame remotely to realize the forward rotation, reverse rotation and stop of the roller.
Note that when changing the rolling direction of the workpiece, it is necessary to press the reverse button after the motor is completely stopped, otherwise, it is easy to burn out the motor or other components. After the work is over, turn the speed control knob to a smaller value, turn off the speed control switch, and turn off the power switch.