(1) All relevant parts and tools of the CNC cutting machine must be placed safely, and the place to be placed must also be safe. Now the thieves dare to ask for anything. It must be placed out of the reach of children or children, so as not to hurt people, especially the cutting torch of the CNC cutting machine, it must be placed safely, and the sharp edge is best not to face people when placing it. The best way to place it is to put it in a safe place after using it with a special toolbox for special parts. Or leave a small room dedicated to the storage of related parts and tools. The room should be ventilated, but don’t let the parts get soaked in the rain when it rains.
(2) Never touch any electrical components in the electrical cabinet or console with your hands when the power is on or the main gate valve is not closed. Otherwise, there will be an electric shock. If such a situation occurs, the correct operation method is to turn off the main switch or the main gate valve first. Remember not to operate with water in your hands. It is also very unsafe. Electric shock is a very dangerous thing, but it is not a problem if it is small. Big problems can directly lead to life.
(3) The operator should select the cutting speed according to the provisions of the given cutting elements. It is not allowed to increase the equipment load simply for improving the work efficiency, and deal with the relationship between the equipment life and efficiency and environmental protection. If the cutting speed is adjusted privately, it will It's easy to happen. It will also affect the cutting effect and business benefits of the cutting CNC cutting machine. Therefore, in order to avoid accidents, operators must keep this issue in mind. There is a big reason for small problems.
(4) Mechanical maintenance personnel should ensure that the machine is stopped during maintenance. And put up a warning sign to avoid accidents caused by the sudden operation of the machine. I have seen many similar examples in the newspapers before. Therefore, when the machine maintenance personnel are repairing the machine, this warning sign must be remembered.
(5) If tempering occurs during the cutting process, we should cut off the power in time, shut down and turn off the gas valve. If the tempering valve is burned, stop using it and wait for the manufacturer or professional personnel to replace it. It is not allowed to operate the machine in the case of backfire. In this way, not only the human body will be in danger, but the machine will also be damaged.