First of all, safe operation. Before starting, check all gas pipelines and valves, do not allow leakage, and check whether the gas safety device is effective. Check whether the air inlet pressure meets the specified requirements.
Before connecting the power supply, please check whether there are various objects or obstacles around the equipment, and whether the air, water and power supply used are in normal working condition. Check whether the ground connection related to the machine tool is loose and whether each wire connector socket is intact.
After turning on the power of the device, please do not touch the moving parts of the device to avoid accidental injury; during the daily maintenance of the device, stop and turn off the power of the device.
If backlash occurs during flame cutting, or you smell gas and other peculiar smells, please press the emergency stop switch to turn off the torch and gas source
The operator cannot transfer the external program to the computer's memory at will, and cannot use the disease prevention to poison it and use the U disk provided by the CNC cutting machine manufacturer.
It is forbidden to place metal objects on the surface of the guide rail of the cutting machine, the working surface and the painted surface, and it is forbidden to knock, straighten and trim the workpiece on it.
When loading and unloading paper, please follow the safe operation rules to avoid personal safety accidents or collisions with CNC cutting equipment.
The operator shall not give up work at will, and pay attention to the operating conditions of the machine at any time.