The utilization rate of blanking materials and the service life of cutting consumables for steel plate CNC cutting machines are one of the main factors that directly affect the economic benefits of processing enterprises. The CNC cutting machine can realize the trajectory cutting and walking process of the original material, but it is not smart enough to automatically optimize the raw material cutting trajectory. Of course, this needs to be completed with the relevant cutting nesting software. Of course, not all processing companies cut the material. All need to buy nesting software, especially when the processing material is relatively single and the cutting shape is relatively fixed, you can do a simple graphic arrangement in AUTOCAD drawing to maximize the material utilization rate and reduce the steel processing cost. It is also the most effective way to save processing consumables through common edge cutting.
Any CNC machinery and equipment should not be used in frequent switch-on and turn-off. In the case of CNC cutting machines, multiple switch-on and turn-offs not only reduce the processing efficiency, but also cause certain loss of equipment. Enterprises should reasonably plan the use time of equipment processing, try to complete the cutting tasks in one-time and large batches, and minimize the downtime caused by equipment maintenance. This will directly and indirectly cause varying degrees of loss to the enterprise.