When encountering a power failure, please do not move the machine or the cutting parts, so as not to shift. Once the displacement is caused, it needs to be repositioned, which will cause a certain deviation. After the power is restored, operate according to the normal boot mode, the CNC plasma cutting machine will enter the welcome page after booting, press any key to enter the last cutting interface, then press F7 to move the car manually, and then continue to press F7 to restore the power, this time press Enter, Press Start, so that the cutting gun will drop the gun and start cutting.
In addition to the first time, some customers also use some soil methods, which is to re-select the cutting graphics, or start with the origin according to the last cutting mode, simulate walking to the breakpoint position, then switch the mode to the current state, and then start cutting, although the method is feasible, But it is not as simple and precise as the above operation.https://www.wxsilvercoast.com/