1. The weight of the welding positioner, the center of gravity and the eccentricity of the weldment on the entire work surface, should be within the corresponding data range, and a certain capacity must be ensured.
2. If the optional welding positioner is for circumferential seam welding, the rotation speed should be considered according to the groove of the weldment. The speed should be within the range of the positioner rotation speed adjustment. Is it possible to meet the requirements of smooth operation for the entire process?
3. If the size of the entire weldment of the welding positioner is relatively large on the outer contour, then it is necessary to consider the inclination of the worktable, or whether the inclination angle can meet the welding position of the weldment, etc., when tilted When the contact between the angle and the weldment occurs, then when selecting the workbench, it needs to have a larger gap from the ground, so as to ensure the processing requirements of the entire welding.
4. When it is necessary to start the welding positioner, install the electromagnetic fixture and water-cooled equipment, you should first adjust it with the manufacturer.
5. For the welding current requirements of the welding positioner, the welding parts with a relatively large current are required.