1. The self-adjusting roller frame should be installed in a sturdy, ventilated, rain-proof, moisture-proof, dust-proof place, and away from severe vibration and bumps. It is strictly forbidden to spray corrosive liquid on the equipment.
The welding manipulator is generally composed of columns, beams, slewing mechanisms, trolleys and other components. A device that sends and maintains the welding head or welding torch in the position to be welded, or moves the flux along a specified trajectory at a selected welding speed. The welding positioner is used to drag the workpiece to be welded, so that the welding seam to be welded moves to the ideal position for welding operation. Generally speaking, most manufacturers of welding manipulators, roller frames, welding systems and other welding equipment produce welding positioners; most manufacturers of welding robots produce welding positioners for robots. The welding roller frame is suitable for the welding of circular cylinders. The distance between the rollers can be adjusted according to the size of the cylinder. There are various specifications of the roller frame for users to choose from. The roller frame suitable for large tonnage weldments can be designed and manufactured instead. There are three types of adjustable roller racks: manual screw adjustment, manual bolt shift and electric skateboard shift. By adjusting the center distance of the rollers, it is suitable for different diameter cylinders.
2. It is strictly forbidden to spray corrosive liquid on the equipment. When the main and driven roller frames are installed at the same time, it must be possible to ensure that the main and driven frames are level with the same height, the center line is on the same straight line, and different methods of measuring the diagonal of the main and driven frames are used for timely adjustment. .
3. Quality requirements for placing workpieces: The diameter and weight of workpieces should be strictly controlled and implemented in accordance with relevant design standards, otherwise information security risk accidents may occur. According to the length of these equipment, the distance between the main and auxiliary wheels should be properly and reasonably adjusted.
4. The rubber wheel is only suitable for completing the work at normal temperature. Under special education conditions, the high target temperature condition where the workpiece contacts the rubber wheel should not be higher than 75 degrees, otherwise the country may damage the rubber wheel.
5. When using, the roller should fully start to contact the workpiece in the process, and it is strictly forbidden to have no contact with the welding seam or sharp parts. At the same time, when lifting the workpiece, it is strictly forbidden to hit the roller to prevent the roller or other important parts from being damaged. If the equipment is not fixed Under the impact, a strong impact is likely to cause the whole machine to be overturned.