1. Prepare the plate that needs to be cut, carbon steel, stainless steel, aluminum deformation as small as possible, thickness can not exceed the allowable range of cutting table, according to the thickness of the plate to select the corresponding breakable parts, and into the corresponding cutting torch.
2. Determine single cutting torch, synchronous or symmetrical cutting, select the corresponding button on the operation panel, press the operation panel plasma button to make its inner light, according to the cutting table requirements for pre-flow, cutting flow test, adjust the pre-flow, cutting flow, manually adjust the cutting torch initial height to the height required by the cutting table; set the arc voltage current according to the cutting table.
3. Manually set the cutting torch to the starting position; select the cutting program on the CNC, and complete the work configuration: cutting speed, cutting seam compensation and other content, press the "GO" button to start cutting, according to the operation instructions for the different problems in the cutting, the corresponding processing, until the cutting is completed.https://www.wxsilvercoast.com/