Daily Requirements for Welding Positioners

1. The control part of the positioner should be equipped with a linkage interface for automatic welding.
2. The positioner should be equipped with a conductive device to prevent the welding current from passing through the transmission parts such as bearings and gears. The resistance of the conductive device should not exceed 1mΩ, and its capacity should meet the requirements of the rated welding current.
3. Electrical equipment should comply with the relevant provisions of GB/T 4064.
4. The structure of the workbench should be convenient for clamping workpieces or installing fixtures, and its structural form can also be determined through consultation with the user.
5. The relationship between the large load, the eccentric distance and the center of gravity distance should be explained in the instruction manual of the positioner.