1. Adjust the gap between the iron wedges and the supporting plates, so that the friction force between the supporting plates and the guideways is moderate to improve the motion accuracy.
2. Adjusting the pretightening force, adjusting the loose part and eliminating the transmission gap can improve the transmission accuracy.
3. The plastic guide rail should ensure that the plastic coating is good and not damaged;
4. The gap between the guideway and the guideway of the NC cutting machine can not hold stolen goods and must be well protected.
5. The static pressure guideway should have a set of oil supply system with good filtration effect.
6. Timing, quantitative, accurate, to each moving part of the good lubrication.https://www.wxsilvercoast.com/