1. At the end of the beam of the welding manipulator, the entire load-bearing capacity can reach at least 300 kilograms;
2. And the welding manipulator mainly uses the AC motor device;
3. Because the limit switch device is set on the welding manipulator, it can effectively prevent any situation exceeding the limit during the walking of the beam;
4. If the chain is damaged during the operation of the welding manipulator, the safety device can effectively prevent the beam from falling;
5. The control handle is used, so the welding manipulator can control the up and down and left and right actions of the beam;
6. The welding manipulator also adopts the AC motor and the drive device of the rack and pinion. The precision welding manipulator uses the ball screw, or the precise gear and rack, and also has the control unit of the coding closed loop;
7. When the heavy-duty linear guide pair is used in the welding manipulator, the horizontal and vertical relative movements of the guiding beams are effectively controlled;
8. In fact, there is a base in the welding manipulator. The rotation range of the entire column is 360 degrees, and it also has the function of mechanical automatic locking. Gearbox for manual drive.