Before the CNC cutting machine we used, we need to cut the material on the shelf to cut iron. It should be noted that the discharge of the frame board needs a special level, not uneven. The iron should be parallel. We can follow the C parallel track cutting machine. to make sure.
Before the work operation, the operators in our company need to check the use of the CNC cutting machine, whether there is a problem, and it is necessary to make sure that there is no problem before starting the development, so as to avoid safety accidents in the company, and then check the walking track. Make sure that they have no obstructions before they can be turned on and used in normal life.
If it is a dual-purpose cutting machine, it is divided into a plasma cutting machine and a flame cutting machine. We want to see the thickness of the iron plate to decide which cutting method to use. Both have their advantages. You can choose to open the equipment. If it is only A method of use, this step can be ignored.
Turn on the numerical control system, select graphics management, we need to find a cutting pattern, and then set the required size to be cut, to confirm.
If there is no graphics in the system that we need to cut, it requires improvement. We can use drawing software to draw pictures, and then use nesting software to nest materials.
When nesting, the sequence of cutting development needs to be adjusted through analysis. The design of the management function specified in the above question is to set the size according to the student’s own iron plate and arrange the graphics directly. Save the information, save it and put it in our U disk, and then insert the U disk into the CNC technology system for processing and reading. After everything is ready, press the start button on the CNC cutting machine. That is, the START button, just do research and start cutting.