First of all, it is very important to formulate operation control procedures and establish work, fault, and maintenance files for the specific performance and processing objects of each CNC flame splitting machine. With the development of modern machinery industry, CNC cutting machines have also increased the work efficiency and product quality requirements of sheet metal cutting processing. Therefore, the market potential of CNC cutting machines is still very large, and the market prospects are relatively optimistic. CNC cutting machines with electromechanical integration are called CNC cutting machines, such as CNC plasma and flame cutting machines. They drive the machine tool movement through digital programs. When the machine tool moves, the randomly equipped cutting tool cuts the object. Including maintenance content and maintenance cycle of functional devices and components.
Secondly, the air in the general workshop contains pollutants such as oil mist, dust and even metal powder. Once they fall on the printed circuit or electronic device in the CNC flame splitter system, it is easy to cause damage to the components. The insulation resistance decreases, and even the components and printed circuits are damaged. Therefore, unless it is necessary to make necessary adjustments, maintenance and repairs, in general, it is not allowed to open the cabinet door casually, and it is not allowed to open the cabinet door during use. The grid voltage of the CNC flame splitter system should be monitored from time to time. Once it is found to exceed the normal working voltage, it will cause the system to fail to work normally, and even cause damage to the internal electronic components of the CNC system. CNC flame cutting machine The CNC cutting machine uses a digital program to drive the movement of the machine tool, is equipped with a flame cutting system, and uses the CNC system to control the switch of the flame cutting system to cut metal materials such as steel plates. Therefore, when the equipment does not have automatic detection and protection, the power distribution system must be monitored by a special person, and the stable operation of the power distribution system should be improved as much as possible. The CNC flame splitter adopts DC feed servo drive and DC spindle servo drive. Take care to remove the brushes from the DC motor to avoid corrosion on the surface of the commutator due to chemical corrosion and corrosion, which will damage the commutation performance. Resulting in damage to the entire motor. This is a very serious and easily caused failure.