Maintenance and care precautions for three-dimensional welding platforms

1. Regular cleaning
After each use, remove welding slag, spatter, oil, dust and other debris on the surface of the platform to keep the platform clean.
You can use a soft brush, compressed air or a clean rag for cleaning.
2. Check the connectors
Regularly check whether the connectors such as bolts and pins are loose. If they are loose, tighten them in time.
Ensure the integrity of the connectors. If they are damaged or missing, they should be replaced in time.
3. Anti-rust treatment
If the platform is not used for a long time, apply anti-rust oil or take anti-rust measures to prevent rust.
4. Avoid collision and heavy blows
During use and storage, avoid strong collision and heavy blows on the platform to avoid deformation or damage to the platform.
5. Prevent overload
Do not use it within the rated load capacity of the platform to avoid affecting the accuracy and service life of the platform.
6. Regular accuracy detection
Regularly test the accuracy indicators such as flatness and verticality of the platform.
If the accuracy deviation is found to exceed the allowable range, it should be adjusted or repaired in time.
7. Storage environment
Store in a dry, well-ventilated environment to avoid damage to the platform caused by humidity and high temperature.
8. Handle the module unit with care
When disassembling and moving the module unit, handle it with care to avoid damage.