1. When our customers use the CNC plasma cutting machine for a long time, the automatic cutting function may lose that function because of long-term use. Therefore, the amount of consumables will be particularly large during the use of the plasma cutting machine. . If you lose this function, you can contact our after-sales staff to help you debug it, no need to wait for the consumables all the time.
2. Often our customers do not abide by some rules, and always want to challenge authority. For example, when our plasma cutting machine is cutting metal materials, the thickness of the metal material is generally best not to exceed 10mm. Because generally, if the metal material exceeds about 10mn, it is more nozzle-consuming, and once or twice may not have any consequences. However, if the nozzle is used in excess of the standard for a long time, the nozzle will be damaged more frequently, and the cutting effect will also be affected. Therefore, when buying or using the machine, we must figure out our own needs, and read the product manuals, follow the requirements, and contact our after-sales staff in time if you don't understand the problem.
3, if we use a CNC cutting machine to perforate and cut in normal times, the general arc cutting of the edge may be a lot of effort, and the chance of loss of raw materials will be greater. So when you use the CNC cutting machine to operate this type of metal material, you must be careful, otherwise it will also be one of the reasons for the loss of raw materials when you use the CNC cutting machine to operate.
4, the use of vulnerable parts of fake spare parts: Many customers feel that the price of original wearing parts is too much, and there are many cheap alternatives on the market to buy, so I am very excited, and buy and use with the mentality of trying, but In fact, this time has already jumped into a trap, that is, these fake parts may be invading your machine step by step, and users are still complacent that these substitutes can replace the original authentic products.
5. Another reason is that during the cutting process of the cutting nozzle, the current intensity of the power supply is turned on too high. When the cutting nozzle cuts the components, it may be that the cut part is cut too much.
6. Repair and maintenance of the machine: If you treat the machine as a person, it is easy to understand that people need to rest, and they need to go to the doctor if they are sick. So the machine is the same. We don’t need to let it work 24 hours a day, all year round. We have to check and repair every other time to see if there are any problems. Only when we can find the problem in time, we won’t bring the problem. The machine went to work, so that the raw materials were wasted excessively.
7. Sometimes, if the numerical control system of the numerical control plasma cutting machine is unstable, this kind of situation will occur. Because the internal CPU and hard disk of the numerical control system may be used for a long time and cause heat, it will cause the operating system to be unstable and not normal. To work, or the fan is used for a long time, causing wear, or hard disk vibration or virus infection, resulting in production stagnation, such defects will occur, or cutting errors will be caused, cutting production will be delayed, and the loss of raw materials will be excessive.