1. The query welding positioner is executed regularly, and the overturning support is filled with lubricating grease once every six months.
2. Check the reducer oil once a month, fill up immediately when the oil amount is less than the marking line, and replace all the reducer oil once a year;
3. Before working, check whether there are other objects within the reach of the product workpiece to prevent bumps and bumps;
4. When the welding positioner is in the equipment, when disassembling the product workpiece, check whether the round pin is removed and whether the small chain is returned in time to prevent the product workpiece from damaging the fixture; when lifting the product workpiece, do not shake violently to avoid the product workpiece. damage the fixture;
5. When the product workpiece falls on the fixture, it should be handled with care, and it should not have a great impact on the fixture and positioner; after the product workpiece is transferred to the work center, the main power switch should be closed, and the switching power supply should be disconnected to prevent wrong operation.