1. Daily cleaning: After each use, the welding slag, dust, oil and other impurities on the surface of the platform should be cleaned in time. You can use a clean cloth or brush to wipe it. For stubborn stains, you can use a mild detergent to clean it, but avoid using corrosive substances such as strong acids and alkalis to avoid damaging the surface of the platform.
2. Regular inspection: Regularly check the surface flatness and accuracy of the platform, and you can use tools such as levelers and measuring tools to measure. If the platform is found to be deformed, worn or has decreased accuracy, it should be adjusted or repaired in time. At the same time, check whether the various connection parts of the platform are loose. If there is any looseness, tighten it in time.
3. Avoid overloading: Use it strictly in accordance with the carrying capacity of the 3D welding platform to avoid overloading and causing deformation or damage to the platform. When placing welding workpieces and equipment, the weight should be evenly distributed to avoid excessive local force.
4. Prevent collision: During use, pay attention to prevent the platform from colliding with other hard objects to avoid damage or deformation of the platform surface. When lifting the workpiece, be careful to avoid the workpiece hitting the platform.
5. Anti-rust treatment: If the platform is not used for a long time, it should be treated with anti-rust. A layer of anti-rust oil or anti-rust paint can be applied on the surface of the platform to prevent the platform from rusting. Before using it again, clean the anti-rust oil or anti-rust paint.
6. Lubrication and maintenance: For the movable parts on the platform, such as adjustable supports, positioning pins, etc., lubrication and maintenance should be performed regularly. You can use an appropriate amount of lubricating oil or grease to keep the parts flexible and reduce wear.
7. Storage environment: The platform should be stored in a dry and well-ventilated environment to avoid moisture, rain or exposure to corrosive gases. If conditions permit, it is best to store the platform in an indoor environment with constant temperature and humidity to ensure its stable accuracy.
