Material Maintenance
1. Avoid Impacts from Hard Objects: Handle workpieces gently, avoiding dragging or impact placement to prevent scratches and dents on the working surface.
2. Distribute Load: Workpieces should be distributed evenly to avoid concentrating on a single area and reduce localized wear.
3. Environmental Control: Keep the platform away from vibration sources and maintain a stable ambient temperature (temperature difference ≤ 10℃) to prevent deformation caused by thermal expansion and contraction.
Precision Maintenance
1. Regular Calibration: Check flatness (error ≤ 0.1mm/m) and hole spacing accuracy (deviation ≤ 0.05mm) quarterly and promptly repair minor defects.
2. Standardized Operation: Do not weld or grind directly on the platform to avoid high temperatures and mechanical damage.
3. Support Optimization: Use a level during installation and select a suitable support structure (e.g., adjusting bolts should be flexible).
Daily Cleaning
1. Timely Cleaning: Remove iron filings and dust after work to prevent particles from embedding in the work surface and causing indentations.
2. Special Tools: Wipe with a lint-free cloth and neutral detergent to avoid damaging the surface with corrosive solvents.
3. Structural Inspection: Regularly clean positioning holes and T-slots to ensure they are not blocked or damaged.
Rust Prevention Treatment
1. Regular Oiling: In humid environments, shorten the rust-preventive oil spraying cycle (recommended once a month). When not in use for extended periods, apply grease and cover with a protective film.
2. Moisture Control: Control humidity below 70% to prevent water film from accelerating electrochemical corrosion.
3. Storage Protection: Cover with a wooden cover when not in use; strictly prohibit water droplets from contacting the platform.
