1. Appropriately reduce the pulse width and peak current, that is, reduce the size of the pit.
2. The guide wheel and bearing maintain good precision and smooth operation, reduce the vibration of the steel wire and the jumping of the steel wire, and keep the movement track of the steel wire to a minimum.
3. The wire maintains the proper tension, and adjusts the guide wheel and the feeding block so that the tension in the working area remains unchanged when the wire goes up and down.
4. The silk should not be too tight, the moisture should not be too new, the new moisture cutting efficiency is definitely useful, but the cutting completion is not the new water.
5. Add a splint on the upper and lower sides of the thin workpiece, so that the rewind can be buffered within the range of the splint.