Nitrided Welding Table 2400x1200mm (94"x47")

Introduction

Material:

Usually high-strength structural steel (Q355) is used, with a thickness of about 10-20mm to ensure resistance to deformation and high temperature resistance.

Frames and support structures use square steel/rectangular steel pipes (e.g. 50 x 50mm or 60 x 60mm) to enhance overall rigidity.

Surface treatment:

Precision grinding: The flatness error is controlled within ± 0.1mm/m, suitable for precision welding and assembly.

Anti-rust treatment: spray anti-rust paint or hot-dip galvanizing (HDG) after sandblasting to prolong service life.

Parameters	Typical value	Description
Countertop size	94"×47"(2400×1200mm)	Suitable for small and medium-sized workpieces while taking into account space utilization.
Countertop thickness	≥12mm	Ensure resistance to deformation (especially during high-temperature welding).
Hole spacing accuracy	±0.05mm	Determine the repeat positioning accuracy of the fixture.
Bearing capacity	≥2000kg(static)	The weight of the workpiece and the operating pressure need to be considered.
Extended interface	Standard hole compatibility	Support third-party fixture systems.