CNC plasma cutting machine is a new type of thermal cutting equipment. Its working principle is to use the heat of high-temperature plasma arc to locally melt the metal at the incision of the workpiece, and use the momentum of the high-speed plasma to remove the molten metal to form an incision. .Up to the present development of plasma cutting, the available working gas has a significant impact on the cutting characteristics, cutting quality and speed of the plasma arc. Commonly used plasma arc working gases are argon, hydrogen, nitrogen, oxygen, air, water vapor and some mixed gases. CNC cutting machine manufacturers, laser cutting machine manufacturers, Xinxiang cutting machine manufacturers, Xinxiang laser cutting machine manufacturers, welding robot manufacturers, Xinxiang welding robot manufacturers CNC cutting machine rail CNC cutting machine rail CNC cutting machine rail Xinxiang Tianyuan CNC Equipment Co., Ltd. the company
Laser cutting is to use a high-power density laser beam to scan the surface of the material, heating the material to thousands to tens of thousands of degrees Celsius in a very short time to melt or vaporize the material, and then use high-pressure gas to remove the melted or vaporized material from the slit It is blown away to achieve the purpose of cutting materials. Laser cutting, because the traditional mechanical knife is replaced by an invisible beam, the mechanical part of the laser head has no contact with the work, and will not cause scratches on the work surface during work; laser cutting speed is fast, the cut is smooth and flat, generally not required Subsequent processing; small cutting heat-affected zone, small plate deformation, narrow slit (0.1mm~0.3mm); no mechanical stress, no shearing burr; high processing accuracy, good repeatability, and no damage to the material surface; CNC programming, Any plan can be processed, and large-format whole boards can be cut without opening the mold, which is economical and time-saving.
In terms of cutting accuracy, plasma can reach within 1mm, and laser can reach within 0.2mm; in terms of cost, plasma cutting machines are much cheaper than laser cutting machines. In terms of processing accuracy, plasma cutting is coarser than laser cutting. Processing, one is fine processing.https://www.wxsilvercoast.com/