1. Daily Maintenance (Required Daily)
1. Basic Inspection
This takes approximately 3-5 minutes, including surface cleaning and checking the locking status of the PC pins.
2. Lubrication and Tightening
Lubrication of the adjustable leg threads requires an additional 2-3 minutes.
2. Periodic Maintenance (Weekly/Monthly)
1. Deep Cleaning
Disassembling and cleaning modular components takes 15-20 minutes, extending to 30 minutes if using an ultrasonic cleaner.
2. Precision Calibration
Flatness testing with a laser interferometer takes approximately 10 minutes, and adjusting the legs takes 5-10 minutes.
3. Annual Maintenance (Comprehensive Overhaul)
1. Rust Prevention and Structural Inspection
Spraying anti-rust oil throughout the entire system takes 30-40 minutes, and inspecting for structural deformation takes approximately 20 minutes.
2. Cooling System Maintenance
Cleaning the water cooler and replacing the filter cloth takes 15-25 minutes. Special Cases: If cracks or severe wear are detected on the countertop, return it to our factory for repair within 1-3 business days.
