The comprehensive inspection cycle of the Rolling Seam Welding Machine is usually carried out every 6 months to 1 year.
The specific inspection contents include:
1. Appearance inspection: Check whether there are any damaged, deformed or loose parts on the appearance of the equipment.
2. Electrical system inspection: Check whether the power cord, grounding wire and electrical connection are firm and not aged or damaged.
3. Mechanical parts inspection: Check whether the moving parts of the welding machine (such as sliders, conductive plates, etc.) are operating normally and whether the lubrication is good.
4. Welding quality inspection: Check whether the welding current, voltage and welding speed meet the set values and whether the weld quality is qualified by welding the test piece.
5. Cooling system inspection: Ensure that the cooling water circulation is unobstructed without blockage or leakage.
6. Safety device inspection: Check whether the safety devices such as protective covers and emergency stop buttons are complete and functioning properly.
Special circumstances
1. High frequency use: If the welding machine is used frequently or the working environment is harsh (such as high dust and high humidity), it is recommended to shorten the inspection cycle to once every 3 months.
2. Equipment aging: For welding machines that have been used for more than 6 years, it is recommended to conduct a comprehensive inspection every six months.
Daily maintenance
1. In addition to regular comprehensive inspections, daily maintenance is also very important. It is recommended to check the electrical connection, lubrication and cooling system of the equipment before use every day to ensure that the equipment is in good condition.
