Material Maintenance
1. Avoid Impacts: Handle with care during use to avoid collisions or scratches on the platform surface, especially the working surface.
2. Environmental Control: The platform should be placed on a flat, firm, and dry surface, away from vibration sources, and in a well-ventilated area.
3. Regular Inspection: Regularly check the platform connectors and screws for looseness and tighten them promptly to prevent structural deformation.
Precision Maintenance
1. Installation and Adjustment: Before use, level the platform with a spirit level and check the flatness error with optical instruments to ensure datum accuracy.
2. Even Use: Place and move workpieces gently, avoiding concentrated use in a single area to evenly distribute the platform load.
3. Support Selection: Select a suitable support frame structure based on the workpiece weight, ensuring flexible adjusting bolts and appropriate support density.
Daily Cleaning
1. Cleaning Method: Wipe the platform surface with a soft, lint-free cloth to remove dust, oil, and other impurities to avoid affecting positioning accuracy.
2. Tool Selection: Neutral detergent (pH 7-8) and microfiber cloth are recommended to avoid corroding or scratching the material.
3. Gap Treatment: Gap areas such as positioning holes and T-slots can be cleaned with lint-free cotton swabs to ensure no residue remains.
Rust Prevention Treatment
1. Sand Removal and Spraying: The platform bottom surface must be thoroughly cleaned of sand and sprayed with rust-preventive paint or oil to prevent rust.
2. Packaging Protection: Use wooden crates for transportation or storage, and cover the working surface with rust-preventive material to avoid damp environments.
3. Lubrication Management: If the platform contains moving parts (such as support legs), regular maintenance with a low-viscosity, dust-resistant grease is required.
