In the use of CNC plasma cutting machine, due to the bilateral drive, no matter which motor has a problem in the longitudinal direction, the CNC plasma cutting machine will experience jitter. Let us understand the reasons for the jitter of the CNC plasma cutting machine in use.
First of all, the service life of the CNC plasma cutting machine is too long, or the maintenance of the CNC plasma cutting machine is not paid for a long time, which causes the bearings, gears and racks of the CNC cutting machine to wear. The damage of the bearing will cause the CNC cutting machine to not run smoothly, and it will cause the vibration of the CNC cutting machine, and the wear of the gear and rack will cause the CNC cutting machine to lose steps and jam the teeth during the walking process of the CNC cutting machine. Cause the jitter of the CNC cutting machine.
The longitudinal direction of the CNC plasma cutting machine adopts the floating type, which prevents the CNC cutting machine from jumping teeth due to the wear or impact deformation of the track and rack. Therefore, the spring used to fix the walking motor will be fixed when we install it. The buffer. When the spring is fixed too tightly, the combination between the gear of the walking motor and the rack of the track is too tight, resulting in no buffering of the walking motor, and vibration of the CNC cutting machine. Generally, the stepping motor used on the CNC cutting machine is a three-phase wire. When one or more of the wires are not in contact with each other, the motor will lose phase after the soldering, which directly causes the motor to not run or shake. Random running and other phenomena, resulting in the phenomenon of shaking of the CNC cutting machine.https://www.wxsilvercoast.com/