How to adjust the cutting speed of the CNC cutting machine?

For a CNC flame cutting machine, the cutting speed is mainly determined by the gas pressure used for cutting, the size of the cutting nozzle used, and the thickness of the cut sheet. When the operator is trained, the engineer will give the operator a set of recommended data. This is the cutting machine manufacturer Generalized data summarized based on the accumulation of years of cutting experience, including what thickness of the plate, which type of cutting nozzle to choose, what range of cutting gas pressure values and the recommended cutting speed used in these situations. However, because the actual cutting process involves the actual cutting gas pressure, the operator's fire adjustment, the cutting environment and other complex issues, the operator is often required to fine-tune the speed according to the actual situation to obtain the actual cutting speed value suitable for the user. For the CNC plasma cutting machine, the plasma power supply manual contains recommended parameter values. The engineer will also explain and explain to the operator during operator training. This set of values also belongs to the reference value of CNC plasma cutting. The final determination of the actual cutting speed also requires the operator to fine-tune according to the manufacturer's recommended parameters and the actual cutting effect. For the judgment method of cutting speed, please refer to: How to judge the cutting speed of CNC cutting machine. The actual cutting process is complex and changeable. Some data provided by the CNC cutting machine manufacturers can only be used as reference values. The setting of the cutting speed parameters of the specific CNC cutting machine requires the operator to observe and adjust during the actual cutting process, so as to get the most Good cutting effect.https://www.wxsilvercoast.com/