1. Power-off operation
When performing maintenance and maintenance on the welding machine, the power must be cut off first. Make sure all power cords and switches are in the off state to avoid electric shock accidents.
2. Wear personal protective equipment
Maintenance personnel should wear insulating gloves and goggles to prevent arc light and heat from causing damage to the eyes and hands.
3. Check the working environment
Make sure the working area is dry and well ventilated to avoid the risk of leakage caused by a humid environment. At the same time, check whether there are flammable and explosive items around to ensure safety.
4. Check grounding
Make sure that the metal casing of the welding machine is properly grounded to prevent leakage from causing harm to personnel.
5. Comply with operating procedures
Only professionally trained personnel are allowed to perform maintenance on the welding machine. Maintenance personnel should be familiar with the operating procedures and safety precautions of the equipment.
6. Pay attention to ventilation
When using the welding machine, a good ventilation environment should be maintained to avoid harmful gases generated during welding from causing harm to the human body.
7. Avoid touching hot parts
During maintenance, avoid touching the hot parts of the welding machine, such as heating elements, welding guns, etc., to prevent burns.
8. Check the equipment status regularly
Regularly check the cables, connectors and insulation performance of the welding machine to ensure that there is no damage or aging. If any problems are found, they should be replaced in time.
9. Comply with the maintenance plan
Develop and implement a maintenance plan based on the manufacturer's recommendations and the use of the equipment. After the maintenance is completed, the maintenance content and results should be recorded.
