Product Name: 3D Welding Table For Automotive Applications
Available Sizes: 1000 x 1500mm, 1200 x 2400mm, 1500 x 3000mm, or custom
Material: High-Strength Structural Steel with Nitrided Surface (recommended)
System: D16 (Φ16mm / 50mm grid) or D28 (Φ28mm / 100mm grid) – selectable
Introduction
The 3D Welding Table For Automotive is built specifically for race cars, restoration, heavy trucks, EV conversion, and general automotive fabrication. Flatness is held to ≤0.10mm per square meter, hole accuracy to ±0.05mm, and the 3D design features holes on the top and all four sides for clamping from any direction. The nitrided steel surface resists spatter, rust, and wear. Choose D16 (Φ16mm / 50mm grid) for precision work or D28 (Φ28mm / 100mm grid) for heavy-duty applications. Available sizes range from 1000 x 1500mm to 1500 x 3000mm, with mobile or fixed leg options.
Products Parameters
Products features
Key Features
1.Large formats (1500 x 3000mm) handle frame rails and fifth-wheel assemblies. D28 system delivers clamping force for heavy-gauge steel. Multiple tables join for continuous working surfaces on long trailers.
2.Build fixtures from modular components in minutes. When designs change, simply move clamps and pins to new positions. Inspect critical dimensions directly on the table using grid lines as references.
1.Fixture bumpers, sliders, roll cages, and suspension links at compound angles using angle blocks. Portable configurations (casters or foldable legs) let you take the table to the vehicle.
2.High-precision option (≤0.01mm/m²) meets EV battery tray flatness requirements. Table serves as platform for aligning motor mounts, battery boxes, and controller brackets.
Products Application
★Race Car & Motorsport – Roll cages, chassis sub-frames, suspension control arms, exhaust headers, radiator mounts, intercooler piping.
★Classic Car & Restoration – Frame straightening, floor pan replacement, roll cage installation, custom engine mounts, exhaust fabrication, panel gap alignment.
★Heavy-Duty Truck & Trailer – Frame rail modification, fifth-wheel plates, trailer chassis, landing leg repair, headache racks, heavy bumpers.
★Automotive Prototype – EV battery trays, suspension test fixtures, chassis mules, sub-frame assemblies, pre-production validation.
★Off-Road & Overland – Rock sliders, front/rear bumpers, roof racks, roll cages, suspension links, shock mounts, winch plates.
★Electric Vehicle & EV Conversion – Battery boxes, motor mount brackets, controller plates, cooling system frames, chassis reinforcement.
Company Certification
Customer Feedback
our casey
Let us once again express our gratitude to our customers for their support.
Products Packaging
Our Packaging
FAQ
tIPS FOR REFERENCE
Answering the following questions can roughly help you understand our products.
Q:1.What table size is best for automotive work?
A:1000 x 1500mm for race cars and components. 1200 x 2400mm for most cars and light trucks. 1500 x 3000mm for heavy trucks and trailers.
Q:2.D16 or D28 – which hole system?
A: D16 for race cars, restoration, and general fabrication. D28 for heavy-duty trucks, off-road bumpers, and large frames.
Q:3.Why nitrided steel for automotive?
A: Prevents spatter sticking, resists rust from coolant and moisture, and lasts 5–8 years of daily use without repainting.
Q:4.Can I use this table for frame measuring?
A: Yes. The ≤0.10mm/m² flat surface serves as a reference plane for measuring frame alignment.
Q:5.Can I mount the table on casters?
A: Yes, with locking swivel casters and leveling pads. For critical chassis alignment, fixed legs are better.
Q:6.What is lead time?
A:15–25 business days standard. Custom sizes may take 4–6 weeks. Rush orders available.
Call to Action
📧 Email: evasummer@lemarmetal.com
📱 WhatsApp / WeChat: +8615995269947
💬 Facebook Messenger: Eva Lemarweldingtable
🌐 Official website: www.lemarmachine.com
Hot Tags: 3d welding table for automotive, China, manufacturers, factory, customized
