Working principle:
The upper roller device and the transmission roller are used to form a hole pattern based on the lever principle, so that the H-shaped steel flange that needs to be corrected passes through the hole to generate deformation and achieve the required correction shape after elastic recovery. So as to realize the continuous correction of the H-shaped steel flange to meet the quality requirements.
Equipment composition:
Drive motor
Cycloid reducer
Upper roller device
Drive roller
Depressing device
Guide roller
H beam flange straightenerFrame
Machine base
Base
Electric control device, etc.
Steel H Beam Flange Straightening Machine General installation steps:
1. The installer should clean, decontaminate and degrease the parts
2. The base is installed and the foundation is irrigated twice, and we will provide the foundation diagram
3. The roller surface of the driving roller must be 3-5mm higher than the front and rear roller table surfaces
4. Check the lubrication parts before trial operation, and carry out the full lubrication work of the equipment
6. After the empty test run, the load test run again.
Under normal circumstances, we will send engineers abroad to participate in the installation and commissioning, the general commissioning time is 5-7 days.
During the new crown epidemic, we provide online technical support, such as whatsapp, wechat and other video guidance, which can generally solve equipment installation and debugging problems.
Hot Tags: steel h beam flange straightening machine, China, manufacturers, factory, customized, Industrial Welding Positioners Demonstration, Rotary 300KG Welding Turntable For Pipe, Butt Roll Tank Seam Welding Machine, CNC End Face Milling Machine
