D16 2D Welding Table 1200*1200

Introduction

Size and structure:

The size of the table is 1200 × 1200mm, suitable for flat welding and assembly of small and medium-sized workpieces.

Usually, a single-layer flat structure, no side or bottom extension holes, focusing on two-dimensional (X/Y axis) positioning.

Material and thickness:

The main body is made of Q355 steel (with surface rust prevention treatment) or stainless steel. The thickness of the table top is 8-12mm to ensure anti-deformation ability.

Hole array system:

D16 aperture (16mm), compatible with smaller size fixtures (e.g. M12 bolts), hole spacing 50mm × 50mm, hole density higher than 3D table, suitable for fine adjustment.

Products Parameters

2D welding tables

Product Advantages

Two-dimensional precise positioning:

Through the uniformly distributed 16mm hole array on the tabletop, combined with tools such as quick clamps, locating pins, and right-angle stops, high-precision fixation within the plane is achieved (accuracy ±0.2mm).

Lightweight and low cost:

Omitting the 3D positioning structure, the weight is reduced by about 30% compared to the 3D table, and the price is lower, suitable for budget or simple projects.

Quick installation and cleaning:

The planar structure simplifies slag cleaning. It can be directly processed with a wire brush or compressed air, and the maintenance cost is low.