H Beam Shot Blasting Machine

Introduction

H Beam Shot Blasting Machine is specially designed for continuous shot blasting of plates and profiles and welded structures. Pay special attention to the positioning of the turbine to provide the best efficiency and uniform cleaning of the workpiece. The plates or profiles are loaded on an input roller conveyor, which transports the workpieces through the tunnel part of the machine. At the outer edge of the shot blasting part of the tunnel, there is a turbine, which can optimally clean the workpiece from the top and bottom. The workpiece continues to pass through the chamber to remove the shot blasting agent on the top surface, and finally reaches the output roller conveyor.

Products Parameters

Type		HP 1020	HP 1225	HP 1530
Size of the work-piece	section(L*W)	1000*2000 mm	1200*2500mm	1500*3000mm
Size of the work-piece	work	4000-15000 mm	4000-15000mm	4000-15000mm
Quality standard	cleanness	A-B Sa2-Sa2½	A-B Sa2-Sa2½	A- B Sa2-Sa2½
Shot blaster	numbers	8	8	8
Shot blaster	power	8*11Kw	8*11Kw	8*15Kw
In and out converyor	loading	200kg/m	1000kg/m	1000kg/m
In and out converyor	speed	0.5-5m/min	0.5-5m/min	0.5-5m/min
Circulation quantity		120T/h	120T/h	120T/h
Nominal size(LWH)		677029003150mm	789529853460mm	789535003760mm
Total power		125kw	135kw	148kw

Supply Scope

1 set of mainframe

1 set of Jiao long Recycling Warehouse

1 set of feed roller conveyor

1 set of discharge roller conveyor

1 set of dust removal system

1 set of circulation system

1 set of electronic control system

1 set of maintenance platform.

15 mtr height Chimney

Products features

1. The efficiency of cleaning can be greatly improved and satisfactory cleaning quality can be obtained by adopting high efficiency shot blasting device.

2. The separation device adopts the most advanced full curtain flow screen pellet separator, and the separation efficiency can reach 99%.

3. This machine is equipped with automatic fault detection, alarm delay auto-stop and other functions.

4. The dust is discharged within 80-120Mg/m ³, which improves the working environment of workers.

5. The main ejection zone is lined with an anti-wear Mn13 plate with thickness ≥ 12 mm and high interchangeability. Its service life is more than 3 years.

6. Shot blasting device with curved blades, strong, precision manufacturing and high energy, vulnerable parts long life, easy to replace. The projectile speed is high, the throwing strength is strong, the hot zone of the shot blasting device is concentrated.